Taigen 2.4 gig GHZ Transmitter Control Upgrade 1:16 Scale RC Tank T5 Version
All of our Taigen parts are genuine as we are the UK approved supplier for Taigen
This sale is for the new three part set and you will receive a digital transmitter, receiver/control unit and speaker. Also, included with this latest version of the kit is a set of servo leads and the extra sound module, along with the volume switch
The system is designed to be used for both BB firing and infra red tanks and will improve the transmitter range but this version is not compatible with the older 2.4 taigen unit and will not fight on infrared so can be used on the BB side only
The receiver/control unit is designed to replace the RX18 main board and receiver board which are found in most Heng Long and Taigen
Fitting this system means that your tank or tanks will no longer require an aerial. Ideal if you are trying to make an historically accurate model
Having this system removes that annoying requirement of continually having to swap crystals in the transmitter, when you move from tank to tank. No crystals are used in this new set up
The frequency of the transmitter has been set by the factory and a simple process (instructions are included) allows the tank commander/driver (i.e you!) to bind the transmitter to other Taigen receivers which may have a different frequency
The system also has a built in fan to cool the board
The speaker is an improvement on the standard Heng Long speaker and has a higher output. Specifications are output 3W, rather than the Heng Long one which is at 0.5W, frequency 150Hz-15KHz, size 5.8cm x 5.8cm
This board is NOT oriented on Lipo batteries, operation at your own risk and without warranty claims!
You may also like...
8 Pin Connector Basic for Heng Long 1:16 Scale RC Tank
This sale is for a basic 8 pin connector and can be used with all Heng Long 1:16 scale RC tanks
PLEASE NOTE THAT THIS CONNECTOR DOES NOT HAVE THE EXTRA PRONGS - SEE MY OTHER ITEMS FOR ALTERNATIVE CONNECTOR
Taigen 2.4 Gig Cable Set including volume switch
Only a few left!
May also be used with the RX18
On Off Switch with Tamiya Battery Connector for Heng Long RC Tank
This sale is for an on/off switch with battery connector as shown in the photos
It is the Tamiya style connector and is ideal for a replacement item or for incorporating into a scratch build