Taigen V2/3 German Heavy Tank sound module 1:16 RC Tank
This is the sound module for the new Taigen V2 or V3 board
please note it will not work on the version 1 boards
This is the sound for German heavy tanks
If you already own a Taigen V2 or V3 board, and you want this sound in your tank, you only need our new sound module
It simply plugs in and replaces your existing module
Taigen 2.4 gig GHZ Tk T5 Version V3 with the on/off Transmitter Control Upgrade 1:16 Scale RC Tank recoil switch
Sold out
All of our Taigen parts are genuine as we are the UK approved supplier for Taigen
This sale is for the new three part set with the on /off track recoil built in to the board
You will receive a digital transmitter, receiver/control unit and speaker. Also, included with this latest version of the kit is a set of servo leads and the extra sound module, along with the volume switch
The system is designed to be used for both BB firing and infra red tanks and will improve the transmitter range, but this version is not compatible with the older 2.4 taigen unit and will not fight on infrared so can be used on the BB side only
The receiver/control unit is designed to replace the RX18 main board and receiver board which are found in most Heng Long and Taigen
Fitting this system means that your tank or tanks will no longer require an aerial. Ideal if you are trying to make an historically accurate model
Having this system removes that annoying requirement of continually having to swap crystals in the transmitter, when you move from tank to tank. No crystals are used in this new set up
The frequency of the transmitter has been set by the factory and a simple process (instructions are included) allows the tank commander/driver (i.e you!) to bind the transmitter to other Taigen receivers which may have a different frequency
The system also has a built in fan to cool the board
The speaker is an improvement on the standard Heng Long speaker and has a higher output. Specifications are output 3W, rather than the Heng Long one which is at 0.5W, frequency 150Hz-15KHz, size 5.8cm x 5.8cm
This board is NOT oriented on Lipo batteries, operation at your own risk and without warranty claims!
Taigen V2/3 German Tank sound module 1:16 RC Tank
This is the Panzer III sound module for the new Taigen V2 or V3 board this is the first sound card they made for german tanks
please note it will not work on the version 1 boards
If you already own a Taigen V2 or V3 board, and you want this sound in your tank, you only need our new sound module
It simply plugs in and replaces your existing module
Taigen 2.4 gig GHZ MFU Control Upgrade 1:16 Scale RC Tank V3 Version with anti track recoil
All of our Taigen parts are genuine as we are the UK approved supplier for Taigen
This sale is for the new three part set with the on /off track recoil built in to the board
You will receive a new MFU, sound card
The system is designed to be used for both BB firing and infra red tanks and will improve the transmitter range, but this version is not compatible with the older 2.4 taigen unit and will not fight on infrared so can be used on the BB side only
The receiver/control unit is designed to replace the RX18 main board and receiver board which are found in most Heng Long and Taigen
Fitting this system means that your tank or tanks will no longer require an aerial. Ideal if you are trying to make an historically accurate model
Having this system removes that annoying requirement of continually having to swap crystals in the transmitter, when you move from tank to tank. No crystals are used in this new set up
The system also has a built in fan to cool the board
This board is NOT oriented on Lipo batteries, operation at your own risk and without warranty claims!